With the development trend of laser,Laser welding processingTechnology is getting better and better. How to identify the reason for the problem and how to solve the product quality problem is a very critical part of the whole process of the production process management method.
to be rightLaser welding processingThe quality inspection is the inspection of the welding quality of electric welding. The tensile strength test can also be carried out by using the Lashen tester.in accordance withLaser welding processingThe root cause of the situation must be replaced after the quality of the raw materials is checked or the processing technology standards of the laser welding equipment wave setting and processing must be changed.If the welding products are not welded continuously at the same position, it is likely that the console and the clamp have problems;Laser welding processingThe kinetic energy reliability or the console and fixtures are not an issue.
In addition, enhanceLaser welding processingQuality Assurance Management Methods.In the whole process of electric welding, firstly, the pressure tester should be used to test the working pressure of electric welding so that the working pressure will not change.Laser welding processingThe posture of the engine is checked; secondly, the detection of the amount of current must be improved to prevent fluctuations in the power supply voltage, excessive temperature caused by the overweight operation of the automatic welding machine, which reduces the amount of current output, and loose steel parts. Problems such as reduced current flow and poor characteristics of automatic welding machines; thirdly, changes in the thickness of steel parts, the thickness of coatings, and the composition of metal materials should be taken into account to prevent the appearance of poor electric welding products.
