In our daily life, the application for sheet metal cabinets is very extensive. These sheet metal cabinets are of different shapes, but from the appearance, they are made of different shapes of sheet metal shells spliced together, so that they give the impression of being easy to assemble. In fact, the installation of sheet metal cabinets is not simple and also has its own unique assembly process, so we have to take some aspects into full consideration when assembling them. So do you know what aspects to consider when assembling a sheet metal cabinet? The following aspects should be considered when assembling the sheet metal cabinet.
1、Sheet metal cabinet assembly before the development of a good assembly benchmark
Some sheet metal cabinets have complex internal structures and requirements for sealing, so we need to specify good assembly benchmarks at this time. For example, if we need to assemble cooling piping systems, ventilation systems and other components that need to be sealed, their joints are often sealed with sealant or rubber gaskets, so if we find that there is a deviation in the position after assembly and we need to dismantle them, it will be very troublesome because once such pipelines are installed, it is often difficult or impossible to dismantle them. Therefore, before assembly, we can only roughly estimate the installation position, and then determine the position when the actual assembly.
2、Sheet metal cabinets should pay attention to the correct assembly sequence
Before installing a sheet metal cabinet, we must pay attention to understanding the assembly drawings and sorting out the assembly relationship, especially to clarify the technical requirements in the drawings. Before installation, prepare the complete set of parts to be used and arrange the parts and external components neatly. The assembly sequence of the sheet metal cabinet is generally like this: start from the bottom, install the protective net, then the bottom shock absorber, then install the cabinet top cover and accessories, then from top to bottom, install each layer, then install the side and back doors, then the cabinet upper and lower fixed bars, turn the frame.
3、Sheet metal cabinet assembly should consider customer experience
Sheet metal cabinets sometimes expose certain product design problems when they are installed. At this time, the installer should give feedback to the designer in time, and at the same time, for good design, he can also recommend it to other designers. In addition, the sheet metal cabinet will have a metallic texture and beautiful appearance after being sprayed and polished, so the finished product of the sheet metal cabinet should be as aesthetically pleasing as possible. The tightness of the rotating frame inside the cabinet and the flexibility of the guide rail pulling should be tested during assembly, which will not only meet the customer’s requirements on product appearance, but also bring a better experience of use. Generally, after the sheet metal cabinet has been installed, we have to check whether the sheet metal shell is neat and tidy and whether there are any scratches or unevenness on the surface.
In summary, these are some of the aspects to be considered when assembling a sheet metal cabinet. In the process of assembling sheet metal cabinets, we can only fully consider these aspects in order to better assemble a qualified sheet metal cabinet product!
