The technology is widely used in the production and processing of metal materials and non-metal materials, which can greatly reduce the production and processing time, reduce production costs, and improve the quality of steel parts.But what should I do if there is a deviation in the laser processing cutting??Then we must find the reason for the deviation from several levels, so as to deal with the deviation according to this reason.DownLaser processing cuttingThe manufacturer will cite this reason for your reference.
1.Steel geometry causes deviation
The target is the plate or cover part, because a variety of?due to the influence,Laser processing cuttingThe target surface has fluctuations and irregularities, and the influence of the thermoelectric effect in the whole process of laser cutting will also cause the surface deformation of the metal sheet.1In the dimensional laser cutting process, the cover will also cause unevenness of the surface during the entire process of suppressing the forming. All of these are caused by the laser focusing and the production and processing of the target surface and the idealized part of the target surface to produce arbitrary changes.
2.Steel clamping equipment leads to deviation
The steel parts are placed on the fibrous work table. Due to production and processing deviations, long-term damage between the steel parts and laser burns, the needle bed will appear uneven, and such unevenness will also cause cold-rolled steel plates and lasers to focus. Random error in the middle part.
In the whole process of machine application, the power cord of the automatic cutting machine has problems, the grounding device between the automatic cutting machine and the electronic computer is in poor condition, and the computer operating system senses computer viruses and other factors, all of which lead to the deviation of fiber laser cutting production and processing.
