There are many problems in the production process of sheet metal parts.Sheet metal weldingPiece deformation is one of them, how to deal withSheet metal weldingWhat about the deformation problem?
Usually during the whole cooling processSheet metal weldingThe deformation is related to the type of heat-treated material, refrigeration characteristics, quenching force and other factors. At this time, it needs to be adjusted according to the viscosity, temperature, liquid level, working pressure, application of preservatives, and mixing of the material. The higher the viscosity of the quenching oil and the higher the temperature, the smaller the elliptical deformation. When standing still, the deformation is small.
In the quenching and tempering treatment of steel castingsSheet metal weldingThe deformation is related to the placement method. It needs to be hung as vertically as possible, placed vertically at the bottom of the furnace, and supported horizontally at two points. One of the middle, the fourth is placed on the heat-resistant steel work clothes.
For a sheet metal processing factory, the production and processing steps are unavoidable in the process of laser welding. Since only electric welding can be used to make several parts together, the following will introduce you in detail.Sheet metal welding.
Sheet metal weldingThat is to say, several parts are assembled and welded together to achieve the purpose of production and processing or electric welding of the side seams of individual parts to improve their compressive strength. The use of this welding method in sheet metal processing plants is based on specific regulations and materials. Generally speaking, the key to intelligent robot DC welding machine rental electric welding is to apply when the material is large and the welding is long.
