As we all know, sheet metal fabrication is a relatively complex process, and there are often many factors that limit the quality of sheet metal fabrication, such as assembly. Therefore, we only need to do a good job of assembly in order to guarantee the quality of sheet metal fabrication at a later stage. So what aspects of sheet metal fabrication should we pay attention to when assembling?
The following aspects should be noted in sheet metal fabrication during assembly.
- 1. Before assembling the sheet metal fabrication, you must first read the assembly process and the packing list and other information carefully.
- 2. During the assembly process, semi-finished products and tools are not allowed to be placed in high places, so as to avoid accidentally sliding down and injuring people or products.
- 3、In the process of sheet metal fabrication and assembly, the operation should be carried out in a reasonable manner according to the order of the process, and attention should also be paid to the left and right, while the cooperation of the operator is also very important.
- 4、In the process of sheet metal fabrication and assembly, the process should be reasonable, especially the order of assembly should be noted, then when operating, we should observe the surrounding area and pay attention to the safety of the people around us to avoid personal injury, the location of the assembly should be chosen accurately, if it needs to be modified, it should be reported to the relevant department for approval, and the workpiece that needs to be reworked on site during the assembly process should be agreed by the relevant department before it can be modified.
- 5、During the process of sheet metal fabrication and assembly, it is strictly forbidden to place semi-finished products in places with hidden safety hazards, and they should be placed in places where there is no danger of movement, in order to avoid sliding objects causing injuries to personnel.
- 6、After the assembly of sheet metal fabrication, the products can be shipped to the buyer or put into storage after passing the inspection.
To sum up, these are some of the aspects to be noted in the assembly of sheet metal fabrication. The corresponding assembly work must be done before the sheet metal fabrication, so that the related work can be completed smoothly. Therefore, we must pay attention to the assembly of sheet metal fabrication.
